Production Description
Bayonet heating elements are typically constructed with inline
configurations and have electrical plugin “bayonet” connector to
facilitate quick installation and removal.Bayonet heating elements
are used in industrial processing equipment such as:heat
treating,glass production,ion nitriding,salt baths,non-ferrous
metals liquefy,scientific applications,seal quench furnaces,
hardening furnaces,tempering furnaces,annealing furnaces,and
industrial kilns.The heating element/radiant tube replacement
package consists of Custom Electric bayonet heating elements and
kanthal APM alloy radiant tubes.The bayonent heating elements will
replace original equipment in any electric furnace and handle power
ratings up to 70kw per element.The elements are fabricated from
Ni/Cr or high -temperature Kanthal APM alloy to accommodate
furnace-operating temperatures from 200 to 2250 ℉(95 to 1230℃).
Specification
All ceramic bobbin heaters are custom-made, and the power ratings
are according to the length of the ceramic bobbins shown in the
table below .
Both Ø29mm and Ø32mm ceramic bobbins will fit into a 1 ½ inch
(Ø38mm) metal protection sheath.
The Ø45mm ceramic bobbin will fit into a 2 inch (Ø51.8mm) metal
protection sheath.
| Infrared heater | Ceramic bobbin heater |
| Insulation | Alumina ceramic |
| Heating wire | NiCr 80/20 wire, FeCrAl wire |
| Voltage | 12V-480V or as customer's demand |
| Power | 100w-10000w based on your length |
| High temperature | 1200-1400 degree celsius |
| Corrosion preventive | Yes |
| Material | Ceramic and Stainless Steel |
Company profile
Shanghai Tankii Alloy Material Co., Ltd focus on the production of
Nichrome Alloy ,Thermocouple wire ,FeCrAl Alloy,Precision Alloy
,Copper Nickel Alloy ,Thermal Spray alloy etc in the form of
wire,sheet,tape,strip,rod and plate.
We've already got ISO9001 quality system certificate and approval
of ISO14001 environmental protection system.We own a complete set
of advanced production flow of refining ,cold reduction,draw and
heat treating etc.We also proudly have independent R&D
capacity.
Shanghai Tankii Alloy Material Co.,ltd has accumulated lots of
experiences over 35 years in this field.During these years,more
than 60 management elites and high science and techology talents
were employed.They participated in every walk of the company
life,which make our company keep blooming and invincible in the
competitive market.
Based on the principle of first quality,sincere service,our
managing ideology is pursuing technology innovation and creating
the top brand in the alloy field.We persist in qualtiy -the
founddation of the survival.It is our forever ideology to serve you
with full heart and soul.We commited provide customers all over the
world with high-qualtiy ,competive products and perfect service.
Our products,such as nichrome alloy,precision alloy,thermocouple
wire ,fecral alloy,copper nickel alloy,thermal spray alloy have
been exported to over 60 countries in the world.
We are willing to establish strong and long -time parnership with
our customers.
Most complete range of products dedicated to resistance,thermocoule
and furnace manufacturers
Quality with end to end production control
technical support and customer service.
